Results 1 to 1 of 1

Thread: SPEC 25.5-R1 Brushless Motor Lab-R1 V16-PN=R1-255-123-V16-04/01/2017

  1. #1

    SPEC 25.5-R1 Brushless Motor Lab-R1 V16-PN=R1-255-123-V16-04/01/2017

    SPEC 25.5-R1 Brushless Motor Lab-R1 V16-PN=R1-255-123-V16-04/01/2017
    OEM w/12.3mm rotor (black cap) R1-123-715-259. Can also use R1-123-720-001. These are the ONLY rotors approved for this motor.
    Motor approval with gray epoxy ONLY.


    Arrival/Approval Date: 04/01/2017
    Tracking: 1ZA491T4P295275830
    Inspection: 4/20/2017
    Availability check: All Out Raceworks, gripworksrc.com, r1wurks.com/16-motor-lab
    ExCom Final Approval:5/9/2017

    Click image for larger version. 

Name:	R1 V16-25.5 Front_03.31.2017.JPG 
Views:	3 
Size:	323.6 KB 
ID:	7561Click image for larger version. 

Name:	R1 V16-25.5 Rear_03.31.2017.JPG 
Views:	3 
Size:	333.9 KB 
ID:	7562Click image for larger version. 

Name:	R1 V16-25.5 Stator Front_03.31.2017.JPG 
Views:	3 
Size:	338.6 KB 
ID:	7634Click image for larger version. 

Name:	R1 V16-25.5 Stator Rear_03.31.2017.JPG 
Views:	2 
Size:	315.2 KB 
ID:	7631Click image for larger version. 

Name:	R1 V16-25.5-12.3 Rotor Front_03.31.2017.JPG 
Views:	3 
Size:	305.7 KB 
ID:	7632Click image for larger version. 

Name:	R1 V16-25.5-12.3 Rotor Rear_03.31.2017.JPG 
Views:	2 
Size:	305.6 KB 
ID:	7633Click image for larger version. 

Name:	R1 V16-Mtg Plate Outside_03.31.2017.JPG 
Views:	2 
Size:	335.4 KB 
ID:	7635Click image for larger version. 

Name:	R1 V16-Mtg Plate Inside_03.31.2017.JPG 
Views:	2 
Size:	346.0 KB 
ID:	7636Click image for larger version. 

Name:	R1 V16-Timing Assy Outside_03.31.2017.JPG 
Views:	2 
Size:	367.4 KB 
ID:	7637Click image for larger version. 

Name:	R1 V16-Timing Assy Inside_03.31.2017.JPG 
Views:	2 
Size:	327.9 KB 
ID:	7638Click image for larger version. 

Name:	R1 V16-Timing Pieces Outside_03.31.2017.JPG 
Views:	2 
Size:	366.0 KB 
ID:	7639Click image for larger version. 

Name:	R1 V16-Timing Pieces Inside_03.31.2017.JPG 
Views:	2 
Size:	335.5 KB 
ID:	7640
    Last edited by Rob King; 05-09-2017 at 05:42 PM. Reason: added note- approval with gray epoxy ONLY.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •